YOU’RE GUIDE TO SETTING UP AN ETHERNET CABLE SPLITTER:
An Ethernet cable splitter is one of the most valuable and advantageous things in the computer world. Almost every other network is an Ethernet network with people sharing different resources. One of the main reasons why people set up an Ethernet network is to be able to share a single Internet connection among multiple users. Here is where the Ethernet cable splitter comes in. the sharing of the Internet connection is done using Ethernet cables. The purpose of Ethernet cables is to facilitate a faster transfer of data. But mostly the problem occurs when you have only one Ethernet plug on your hardware peripheral but many more computers that you need to be connected to that single Internet connection of yours.
Here is where the work of an Ethernet cable splitter comes in. You can tell from the above mentioned scenario that an Ethernet cable splitter provides a solution by making available a greater number of ports for your convenience. This Ethernet cable splitter, at one end, has a plug that just like the one you can see on a computer or other devices like modem and routers. You have to plug this part in the modem where you normally would have. The other end of the Ethernet cable splitter will have two different kinds of ports. With the help of these you will be able to separate the Ethernet cables. Thus by plugging in two cables into your Ethernet cable splitter and by connecting the Ethernet cable splitter to the modem you will be able to double the number of computers that will now be getting an Internet connection.
HOW TO FIX UP YOUR ETHERNET CABLE SPLITTER:
With this configuration your Ethernet splitter will act as the hub of the network. You will not have to go through the trouble of switching cables to enable internet access to a number of computers. Plus connecting an Ethernet cable splitter to your network is quite an easy task and by following the instructions you can very well do it yourself. Follow the below given instructions and within a few minutes you will be all done.
Take the device that you are using for the internet connection. Then take the cable of the Ethernet cable splitter and insert it into the Ethernet slot that you see on this device. This device may be a hub, a computer or an Internet router. Then connect all the other computers that you want to have internet access to the other end of the Ethernet cable splitter where you will see multiple slots. There, you are done. You may check the network by seeing if the other computers are getting Internet access.